Struct bytes::BytesMut
[−]
[src]
pub struct BytesMut { /* fields omitted */ }
A unique reference to a contiguous slice of memory.
BytesMut
represents a unique view into a potentially shared memory region.
Given the uniqueness guarantee, owners of BytesMut
handles are able to
mutate the memory. It is similar to a Vec<u8>
but with less copies and
allocations.
For more detail, see Bytes.
Growth
One key difference from Vec<u8>
is that most operations do not
implicitly grow the buffer. This means that calling my_bytes.put("hello world");
could panic if my_bytes
does not have enough capacity. Before
writing to the buffer, ensure that there is enough remaining capacity by
calling my_bytes.remaining_mut()
. In general, avoiding calls to reserve
is preferable.
The only exception is extend
which implicitly reserves required capacity.
Examples
use bytes::{BytesMut, BufMut}; let mut buf = BytesMut::with_capacity(64); buf.put(b'h'); buf.put(b'e'); buf.put("llo"); assert_eq!(&buf[..], b"hello"); // Freeze the buffer so that it can be shared let a = buf.freeze(); // This does not allocate, instead `b` points to the same memory. let b = a.clone(); assert_eq!(&a[..], b"hello"); assert_eq!(&b[..], b"hello");
Methods
impl BytesMut
[src]
fn with_capacity(capacity: usize) -> BytesMut
[src]
Creates a new BytesMut
with the specified capacity.
The returned BytesMut
will be able to hold at least capacity
bytes
without reallocating. If capacity
is under 3 * size_of::<usize>()
,
then BytesMut
will not allocate.
It is important to note that this function does not specify the length
of the returned BytesMut
, but only the capacity.
Examples
use bytes::{BytesMut, BufMut}; let mut bytes = BytesMut::with_capacity(64); // `bytes` contains no data, even though there is capacity assert_eq!(bytes.len(), 0); bytes.put(&b"hello world"[..]); assert_eq!(&bytes[..], b"hello world");
fn new() -> BytesMut
[src]
Creates a new BytesMut
with default capacity.
Resulting object has length 0 and unspecified capacity. This function does not allocate.
Examples
use bytes::{BytesMut, BufMut}; let mut bytes = BytesMut::new(); assert_eq!(0, bytes.len()); bytes.reserve(2); bytes.put_slice(b"xy"); assert_eq!(&b"xy"[..], &bytes[..]);
fn len(&self) -> usize
[src]
Returns the number of bytes contained in this BytesMut
.
Examples
use bytes::BytesMut; let b = BytesMut::from(&b"hello"[..]); assert_eq!(b.len(), 5);
fn is_empty(&self) -> bool
[src]
Returns true if the BytesMut
has a length of 0.
Examples
use bytes::BytesMut; let b = BytesMut::with_capacity(64); assert!(b.is_empty());
fn capacity(&self) -> usize
[src]
Returns the number of bytes the BytesMut
can hold without reallocating.
Examples
use bytes::BytesMut; let b = BytesMut::with_capacity(64); assert_eq!(b.capacity(), 64);
fn freeze(self) -> Bytes
[src]
Converts self
into an immutable Bytes
.
The conversion is zero cost and is used to indicate that the slice referenced by the handle will no longer be mutated. Once the conversion is done, the handle can be cloned and shared across threads.
Examples
use bytes::{BytesMut, BufMut}; use std::thread; let mut b = BytesMut::with_capacity(64); b.put("hello world"); let b1 = b.freeze(); let b2 = b1.clone(); let th = thread::spawn(move || { assert_eq!(&b1[..], b"hello world"); }); assert_eq!(&b2[..], b"hello world"); th.join().unwrap();
fn split_off(&mut self, at: usize) -> BytesMut
[src]
Splits the bytes into two at the given index.
Afterwards self
contains elements [0, at)
, and the returned
BytesMut
contains elements [at, capacity)
.
This is an O(1)
operation that just increases the reference count
and sets a few indices.
Examples
use bytes::BytesMut; let mut a = BytesMut::from(&b"hello world"[..]); let mut b = a.split_off(5); a[0] = b'j'; b[0] = b'!'; assert_eq!(&a[..], b"jello"); assert_eq!(&b[..], b"!world");
Panics
Panics if at > capacity
.
fn take(&mut self) -> BytesMut
[src]
Removes the bytes from the current view, returning them in a new
BytesMut
handle.
Afterwards, self
will be empty, but will retain any additional
capacity that it had before the operation. This is identical to
self.split_to(self.len())
.
This is an O(1)
operation that just increases the reference count and
sets a few indices.
Examples
use bytes::{BytesMut, BufMut}; let mut buf = BytesMut::with_capacity(1024); buf.put(&b"hello world"[..]); let other = buf.take(); assert!(buf.is_empty()); assert_eq!(1013, buf.capacity()); assert_eq!(other, b"hello world"[..]);
fn split_to(&mut self, at: usize) -> BytesMut
[src]
Splits the buffer into two at the given index.
Afterwards self
contains elements [at, len)
, and the returned BytesMut
contains elements [0, at)
.
This is an O(1)
operation that just increases the reference count and
sets a few indices.
Examples
use bytes::BytesMut; let mut a = BytesMut::from(&b"hello world"[..]); let mut b = a.split_to(5); a[0] = b'!'; b[0] = b'j'; assert_eq!(&a[..], b"!world"); assert_eq!(&b[..], b"jello");
Panics
Panics if at > len
.
fn truncate(&mut self, len: usize)
[src]
Shortens the buffer, keeping the first len
bytes and dropping the
rest.
If len
is greater than the buffer's current length, this has no
effect.
The split_off
method can emulate truncate
, but this causes the
excess bytes to be returned instead of dropped.
Examples
use bytes::BytesMut; let mut buf = BytesMut::from(&b"hello world"[..]); buf.truncate(5); assert_eq!(buf, b"hello"[..]);
fn clear(&mut self)
[src]
Clears the buffer, removing all data.
Examples
use bytes::BytesMut; let mut buf = BytesMut::from(&b"hello world"[..]); buf.clear(); assert!(buf.is_empty());
unsafe fn set_len(&mut self, len: usize)
[src]
Sets the length of the buffer.
This will explicitly set the size of the buffer without actually modifying the data, so it is up to the caller to ensure that the data has been initialized.
Examples
use bytes::BytesMut; let mut b = BytesMut::from(&b"hello world"[..]); unsafe { b.set_len(5); } assert_eq!(&b[..], b"hello"); unsafe { b.set_len(11); } assert_eq!(&b[..], b"hello world");
Panics
This method will panic if len
is out of bounds for the underlying
slice or if it comes after the end
of the configured window.
fn reserve(&mut self, additional: usize)
[src]
Reserves capacity for at least additional
more bytes to be inserted
into the given BytesMut
.
More than additional
bytes may be reserved in order to avoid frequent
reallocations. A call to reserve
may result in an allocation.
Before allocating new buffer space, the function will attempt to reclaim space in the existing buffer. If the current handle references a small view in the original buffer and all other handles have been dropped, and the requested capacity is less than or equal to the existing buffer's capacity, then the current view will be copied to the front of the buffer and the handle will take ownership of the full buffer.
Examples
In the following example, a new buffer is allocated.
use bytes::BytesMut; let mut buf = BytesMut::from(&b"hello"[..]); buf.reserve(64); assert!(buf.capacity() >= 69);
In the following example, the existing buffer is reclaimed.
use bytes::{BytesMut, BufMut}; let mut buf = BytesMut::with_capacity(128); buf.put(&[0; 64][..]); let ptr = buf.as_ptr(); let other = buf.take(); assert!(buf.is_empty()); assert_eq!(buf.capacity(), 64); drop(other); buf.reserve(128); assert_eq!(buf.capacity(), 128); assert_eq!(buf.as_ptr(), ptr);
Panics
Panics if the new capacity overflows usize
.
fn extend_from_slice(&mut self, extend: &[u8])
[src]
Appends given bytes to this object.
If this BytesMut
object has not enough capacity, it is resized first.
So unlike put_slice
operation, extend_from_slice
does not panic.
Examples
use bytes::BytesMut; let mut buf = BytesMut::with_capacity(0); buf.extend_from_slice(b"aaabbb"); buf.extend_from_slice(b"cccddd"); assert_eq!(b"aaabbbcccddd", &buf[..]);
Methods from Deref<Target = [u8]>
fn len(&self) -> usize
1.0.0[src]
fn is_empty(&self) -> bool
1.0.0[src]
fn first(&self) -> Option<&T>
1.0.0[src]
Returns the first element of the slice, or None
if it is empty.
Examples
let v = [10, 40, 30]; assert_eq!(Some(&10), v.first()); let w: &[i32] = &[]; assert_eq!(None, w.first());
fn first_mut(&mut self) -> Option<&mut T>
1.0.0[src]
Returns a mutable pointer to the first element of the slice, or None
if it is empty.
Examples
let x = &mut [0, 1, 2]; if let Some(first) = x.first_mut() { *first = 5; } assert_eq!(x, &[5, 1, 2]);
fn split_first(&self) -> Option<(&T, &[T])>
1.5.0[src]
Returns the first and all the rest of the elements of the slice, or None
if it is empty.
Examples
let x = &[0, 1, 2]; if let Some((first, elements)) = x.split_first() { assert_eq!(first, &0); assert_eq!(elements, &[1, 2]); }
fn split_first_mut(&mut self) -> Option<(&mut T, &mut [T])>
1.5.0[src]
Returns the first and all the rest of the elements of the slice, or None
if it is empty.
Examples
let x = &mut [0, 1, 2]; if let Some((first, elements)) = x.split_first_mut() { *first = 3; elements[0] = 4; elements[1] = 5; } assert_eq!(x, &[3, 4, 5]);
fn split_last(&self) -> Option<(&T, &[T])>
1.5.0[src]
Returns the last and all the rest of the elements of the slice, or None
if it is empty.
Examples
let x = &[0, 1, 2]; if let Some((last, elements)) = x.split_last() { assert_eq!(last, &2); assert_eq!(elements, &[0, 1]); }
fn split_last_mut(&mut self) -> Option<(&mut T, &mut [T])>
1.5.0[src]
Returns the last and all the rest of the elements of the slice, or None
if it is empty.
Examples
let x = &mut [0, 1, 2]; if let Some((last, elements)) = x.split_last_mut() { *last = 3; elements[0] = 4; elements[1] = 5; } assert_eq!(x, &[4, 5, 3]);
fn last(&self) -> Option<&T>
1.0.0[src]
Returns the last element of the slice, or None
if it is empty.
Examples
let v = [10, 40, 30]; assert_eq!(Some(&30), v.last()); let w: &[i32] = &[]; assert_eq!(None, w.last());
fn last_mut(&mut self) -> Option<&mut T>
1.0.0[src]
Returns a mutable pointer to the last item in the slice.
Examples
let x = &mut [0, 1, 2]; if let Some(last) = x.last_mut() { *last = 10; } assert_eq!(x, &[0, 1, 10]);
fn get<I>(&self, index: I) -> Option<&<I as SliceIndex<[T]>>::Output> where
I: SliceIndex<[T]>,
1.0.0[src]
I: SliceIndex<[T]>,
Returns a reference to an element or subslice depending on the type of index.
- If given a position, returns a reference to the element at that
position or
None
if out of bounds. - If given a range, returns the subslice corresponding to that range,
or
None
if out of bounds.
Examples
let v = [10, 40, 30]; assert_eq!(Some(&40), v.get(1)); assert_eq!(Some(&[10, 40][..]), v.get(0..2)); assert_eq!(None, v.get(3)); assert_eq!(None, v.get(0..4));
fn get_mut<I>(
&mut self,
index: I
) -> Option<&mut <I as SliceIndex<[T]>>::Output> where
I: SliceIndex<[T]>,
1.0.0[src]
&mut self,
index: I
) -> Option<&mut <I as SliceIndex<[T]>>::Output> where
I: SliceIndex<[T]>,
Returns a mutable reference to an element or subslice depending on the
type of index (see get
) or None
if the index is out of bounds.
Examples
let x = &mut [0, 1, 2]; if let Some(elem) = x.get_mut(1) { *elem = 42; } assert_eq!(x, &[0, 42, 2]);
unsafe fn get_unchecked<I>(&self, index: I) -> &<I as SliceIndex<[T]>>::Output where
I: SliceIndex<[T]>,
1.0.0[src]
I: SliceIndex<[T]>,
Returns a reference to an element or subslice, without doing bounds checking.
This is generally not recommended, use with caution! For a safe
alternative see get
.
Examples
let x = &[1, 2, 4]; unsafe { assert_eq!(x.get_unchecked(1), &2); }
unsafe fn get_unchecked_mut<I>(
&mut self,
index: I
) -> &mut <I as SliceIndex<[T]>>::Output where
I: SliceIndex<[T]>,
1.0.0[src]
&mut self,
index: I
) -> &mut <I as SliceIndex<[T]>>::Output where
I: SliceIndex<[T]>,
Returns a mutable reference to an element or subslice, without doing bounds checking.
This is generally not recommended, use with caution! For a safe
alternative see get_mut
.
Examples
let x = &mut [1, 2, 4]; unsafe { let elem = x.get_unchecked_mut(1); *elem = 13; } assert_eq!(x, &[1, 13, 4]);
fn as_ptr(&self) -> *const T
1.0.0[src]
Returns a raw pointer to the slice's buffer.
The caller must ensure that the slice outlives the pointer this function returns, or else it will end up pointing to garbage.
Modifying the container referenced by this slice may cause its buffer to be reallocated, which would also make any pointers to it invalid.
Examples
let x = &[1, 2, 4]; let x_ptr = x.as_ptr(); unsafe { for i in 0..x.len() { assert_eq!(x.get_unchecked(i), &*x_ptr.offset(i as isize)); } }
fn as_mut_ptr(&mut self) -> *mut T
1.0.0[src]
Returns an unsafe mutable pointer to the slice's buffer.
The caller must ensure that the slice outlives the pointer this function returns, or else it will end up pointing to garbage.
Modifying the container referenced by this slice may cause its buffer to be reallocated, which would also make any pointers to it invalid.
Examples
let x = &mut [1, 2, 4]; let x_ptr = x.as_mut_ptr(); unsafe { for i in 0..x.len() { *x_ptr.offset(i as isize) += 2; } } assert_eq!(x, &[3, 4, 6]);
fn swap(&mut self, a: usize, b: usize)
1.0.0[src]
Swaps two elements in the slice.
Arguments
- a - The index of the first element
- b - The index of the second element
Panics
Panics if a
or b
are out of bounds.
Examples
let mut v = ["a", "b", "c", "d"]; v.swap(1, 3); assert!(v == ["a", "d", "c", "b"]);
fn reverse(&mut self)
1.0.0[src]
Reverses the order of elements in the slice, in place.
Examples
let mut v = [1, 2, 3]; v.reverse(); assert!(v == [3, 2, 1]);
fn iter(&self) -> Iter<T>
1.0.0[src]
Returns an iterator over the slice.
Examples
let x = &[1, 2, 4]; let mut iterator = x.iter(); assert_eq!(iterator.next(), Some(&1)); assert_eq!(iterator.next(), Some(&2)); assert_eq!(iterator.next(), Some(&4)); assert_eq!(iterator.next(), None);
fn iter_mut(&mut self) -> IterMut<T>
1.0.0[src]
Returns an iterator that allows modifying each value.
Examples
let x = &mut [1, 2, 4]; for elem in x.iter_mut() { *elem += 2; } assert_eq!(x, &[3, 4, 6]);
fn windows(&self, size: usize) -> Windows<T>
1.0.0[src]
Returns an iterator over all contiguous windows of length
size
. The windows overlap. If the slice is shorter than
size
, the iterator returns no values.
Panics
Panics if size
is 0.
Examples
let slice = ['r', 'u', 's', 't']; let mut iter = slice.windows(2); assert_eq!(iter.next().unwrap(), &['r', 'u']); assert_eq!(iter.next().unwrap(), &['u', 's']); assert_eq!(iter.next().unwrap(), &['s', 't']); assert!(iter.next().is_none());
If the slice is shorter than size
:
let slice = ['f', 'o', 'o']; let mut iter = slice.windows(4); assert!(iter.next().is_none());
fn chunks(&self, size: usize) -> Chunks<T>
1.0.0[src]
Returns an iterator over size
elements of the slice at a
time. The chunks are slices and do not overlap. If size
does
not divide the length of the slice, then the last chunk will
not have length size
.
Panics
Panics if size
is 0.
Examples
let slice = ['l', 'o', 'r', 'e', 'm']; let mut iter = slice.chunks(2); assert_eq!(iter.next().unwrap(), &['l', 'o']); assert_eq!(iter.next().unwrap(), &['r', 'e']); assert_eq!(iter.next().unwrap(), &['m']); assert!(iter.next().is_none());
fn chunks_mut(&mut self, chunk_size: usize) -> ChunksMut<T>
1.0.0[src]
Returns an iterator over chunk_size
elements of the slice at a time.
The chunks are mutable slices, and do not overlap. If chunk_size
does
not divide the length of the slice, then the last chunk will not
have length chunk_size
.
Panics
Panics if chunk_size
is 0.
Examples
let v = &mut [0, 0, 0, 0, 0]; let mut count = 1; for chunk in v.chunks_mut(2) { for elem in chunk.iter_mut() { *elem += count; } count += 1; } assert_eq!(v, &[1, 1, 2, 2, 3]);
fn split_at(&self, mid: usize) -> (&[T], &[T])
1.0.0[src]
Divides one slice into two at an index.
The first will contain all indices from [0, mid)
(excluding
the index mid
itself) and the second will contain all
indices from [mid, len)
(excluding the index len
itself).
Panics
Panics if mid > len
.
Examples
let v = [10, 40, 30, 20, 50]; let (v1, v2) = v.split_at(2); assert_eq!([10, 40], v1); assert_eq!([30, 20, 50], v2);
fn split_at_mut(&mut self, mid: usize) -> (&mut [T], &mut [T])
1.0.0[src]
Divides one &mut
into two at an index.
The first will contain all indices from [0, mid)
(excluding
the index mid
itself) and the second will contain all
indices from [mid, len)
(excluding the index len
itself).
Panics
Panics if mid > len
.
Examples
let mut v = [1, 2, 3, 4, 5, 6]; // scoped to restrict the lifetime of the borrows { let (left, right) = v.split_at_mut(0); assert!(left == []); assert!(right == [1, 2, 3, 4, 5, 6]); } { let (left, right) = v.split_at_mut(2); assert!(left == [1, 2]); assert!(right == [3, 4, 5, 6]); } { let (left, right) = v.split_at_mut(6); assert!(left == [1, 2, 3, 4, 5, 6]); assert!(right == []); }
fn split<F>(&self, pred: F) -> Split<T, F> where
F: FnMut(&T) -> bool,
1.0.0[src]
F: FnMut(&T) -> bool,
Returns an iterator over subslices separated by elements that match
pred
. The matched element is not contained in the subslices.
Examples
let slice = [10, 40, 33, 20]; let mut iter = slice.split(|num| num % 3 == 0); assert_eq!(iter.next().unwrap(), &[10, 40]); assert_eq!(iter.next().unwrap(), &[20]); assert!(iter.next().is_none());
If the first element is matched, an empty slice will be the first item returned by the iterator. Similarly, if the last element in the slice is matched, an empty slice will be the last item returned by the iterator:
let slice = [10, 40, 33]; let mut iter = slice.split(|num| num % 3 == 0); assert_eq!(iter.next().unwrap(), &[10, 40]); assert_eq!(iter.next().unwrap(), &[]); assert!(iter.next().is_none());
If two matched elements are directly adjacent, an empty slice will be present between them:
let slice = [10, 6, 33, 20]; let mut iter = slice.split(|num| num % 3 == 0); assert_eq!(iter.next().unwrap(), &[10]); assert_eq!(iter.next().unwrap(), &[]); assert_eq!(iter.next().unwrap(), &[20]); assert!(iter.next().is_none());
fn split_mut<F>(&mut self, pred: F) -> SplitMut<T, F> where
F: FnMut(&T) -> bool,
1.0.0[src]
F: FnMut(&T) -> bool,
Returns an iterator over mutable subslices separated by elements that
match pred
. The matched element is not contained in the subslices.
Examples
let mut v = [10, 40, 30, 20, 60, 50]; for group in v.split_mut(|num| *num % 3 == 0) { group[0] = 1; } assert_eq!(v, [1, 40, 30, 1, 60, 1]);
fn rsplit<F>(&self, pred: F) -> RSplit<T, F> where
F: FnMut(&T) -> bool,
[src]
F: FnMut(&T) -> bool,
slice_rsplit
)Returns an iterator over subslices separated by elements that match
pred
, starting at the end of the slice and working backwards.
The matched element is not contained in the subslices.
Examples
#![feature(slice_rsplit)] let slice = [11, 22, 33, 0, 44, 55]; let mut iter = slice.rsplit(|num| *num == 0); assert_eq!(iter.next().unwrap(), &[44, 55]); assert_eq!(iter.next().unwrap(), &[11, 22, 33]); assert_eq!(iter.next(), None);
As with split()
, if the first or last element is matched, an empty
slice will be the first (or last) item returned by the iterator.
#![feature(slice_rsplit)] let v = &[0, 1, 1, 2, 3, 5, 8]; let mut it = v.rsplit(|n| *n % 2 == 0); assert_eq!(it.next().unwrap(), &[]); assert_eq!(it.next().unwrap(), &[3, 5]); assert_eq!(it.next().unwrap(), &[1, 1]); assert_eq!(it.next().unwrap(), &[]); assert_eq!(it.next(), None);
fn rsplit_mut<F>(&mut self, pred: F) -> RSplitMut<T, F> where
F: FnMut(&T) -> bool,
[src]
F: FnMut(&T) -> bool,
slice_rsplit
)Returns an iterator over mutable subslices separated by elements that
match pred
, starting at the end of the slice and working
backwards. The matched element is not contained in the subslices.
Examples
#![feature(slice_rsplit)] let mut v = [100, 400, 300, 200, 600, 500]; let mut count = 0; for group in v.rsplit_mut(|num| *num % 3 == 0) { count += 1; group[0] = count; } assert_eq!(v, [3, 400, 300, 2, 600, 1]);
fn splitn<F>(&self, n: usize, pred: F) -> SplitN<T, F> where
F: FnMut(&T) -> bool,
1.0.0[src]
F: FnMut(&T) -> bool,
Returns an iterator over subslices separated by elements that match
pred
, limited to returning at most n
items. The matched element is
not contained in the subslices.
The last element returned, if any, will contain the remainder of the slice.
Examples
Print the slice split once by numbers divisible by 3 (i.e. [10, 40]
,
[20, 60, 50]
):
let v = [10, 40, 30, 20, 60, 50]; for group in v.splitn(2, |num| *num % 3 == 0) { println!("{:?}", group); }
fn splitn_mut<F>(&mut self, n: usize, pred: F) -> SplitNMut<T, F> where
F: FnMut(&T) -> bool,
1.0.0[src]
F: FnMut(&T) -> bool,
Returns an iterator over subslices separated by elements that match
pred
, limited to returning at most n
items. The matched element is
not contained in the subslices.
The last element returned, if any, will contain the remainder of the slice.
Examples
let mut v = [10, 40, 30, 20, 60, 50]; for group in v.splitn_mut(2, |num| *num % 3 == 0) { group[0] = 1; } assert_eq!(v, [1, 40, 30, 1, 60, 50]);
fn rsplitn<F>(&self, n: usize, pred: F) -> RSplitN<T, F> where
F: FnMut(&T) -> bool,
1.0.0[src]
F: FnMut(&T) -> bool,
Returns an iterator over subslices separated by elements that match
pred
limited to returning at most n
items. This starts at the end of
the slice and works backwards. The matched element is not contained in
the subslices.
The last element returned, if any, will contain the remainder of the slice.
Examples
Print the slice split once, starting from the end, by numbers divisible
by 3 (i.e. [50]
, [10, 40, 30, 20]
):
let v = [10, 40, 30, 20, 60, 50]; for group in v.rsplitn(2, |num| *num % 3 == 0) { println!("{:?}", group); }
fn rsplitn_mut<F>(&mut self, n: usize, pred: F) -> RSplitNMut<T, F> where
F: FnMut(&T) -> bool,
1.0.0[src]
F: FnMut(&T) -> bool,
Returns an iterator over subslices separated by elements that match
pred
limited to returning at most n
items. This starts at the end of
the slice and works backwards. The matched element is not contained in
the subslices.
The last element returned, if any, will contain the remainder of the slice.
Examples
let mut s = [10, 40, 30, 20, 60, 50]; for group in s.rsplitn_mut(2, |num| *num % 3 == 0) { group[0] = 1; } assert_eq!(s, [1, 40, 30, 20, 60, 1]);
fn contains(&self, x: &T) -> bool where
T: PartialEq<T>,
1.0.0[src]
T: PartialEq<T>,
Returns true
if the slice contains an element with the given value.
Examples
let v = [10, 40, 30]; assert!(v.contains(&30)); assert!(!v.contains(&50));
fn starts_with(&self, needle: &[T]) -> bool where
T: PartialEq<T>,
1.0.0[src]
T: PartialEq<T>,
Returns true
if needle
is a prefix of the slice.
Examples
let v = [10, 40, 30]; assert!(v.starts_with(&[10])); assert!(v.starts_with(&[10, 40])); assert!(!v.starts_with(&[50])); assert!(!v.starts_with(&[10, 50]));
Always returns true
if needle
is an empty slice:
let v = &[10, 40, 30]; assert!(v.starts_with(&[])); let v: &[u8] = &[]; assert!(v.starts_with(&[]));
fn ends_with(&self, needle: &[T]) -> bool where
T: PartialEq<T>,
1.0.0[src]
T: PartialEq<T>,
Returns true
if needle
is a suffix of the slice.
Examples
let v = [10, 40, 30]; assert!(v.ends_with(&[30])); assert!(v.ends_with(&[40, 30])); assert!(!v.ends_with(&[50])); assert!(!v.ends_with(&[50, 30]));
Always returns true
if needle
is an empty slice:
let v = &[10, 40, 30]; assert!(v.ends_with(&[])); let v: &[u8] = &[]; assert!(v.ends_with(&[]));
fn binary_search(&self, x: &T) -> Result<usize, usize> where
T: Ord,
1.0.0[src]
T: Ord,
Binary searches this sorted slice for a given element.
If the value is found then Ok
is returned, containing the
index of the matching element; if the value is not found then
Err
is returned, containing the index where a matching
element could be inserted while maintaining sorted order.
Examples
Looks up a series of four elements. The first is found, with a
uniquely determined position; the second and third are not
found; the fourth could match any position in [1, 4]
.
let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55]; assert_eq!(s.binary_search(&13), Ok(9)); assert_eq!(s.binary_search(&4), Err(7)); assert_eq!(s.binary_search(&100), Err(13)); let r = s.binary_search(&1); assert!(match r { Ok(1...4) => true, _ => false, });
fn binary_search_by<'a, F>(&'a self, f: F) -> Result<usize, usize> where
F: FnMut(&'a T) -> Ordering,
1.0.0[src]
F: FnMut(&'a T) -> Ordering,
Binary searches this sorted slice with a comparator function.
The comparator function should implement an order consistent
with the sort order of the underlying slice, returning an
order code that indicates whether its argument is Less
,
Equal
or Greater
the desired target.
If a matching value is found then returns Ok
, containing
the index for the matched element; if no match is found then
Err
is returned, containing the index where a matching
element could be inserted while maintaining sorted order.
Examples
Looks up a series of four elements. The first is found, with a
uniquely determined position; the second and third are not
found; the fourth could match any position in [1, 4]
.
let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55]; let seek = 13; assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Ok(9)); let seek = 4; assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Err(7)); let seek = 100; assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Err(13)); let seek = 1; let r = s.binary_search_by(|probe| probe.cmp(&seek)); assert!(match r { Ok(1...4) => true, _ => false, });
fn binary_search_by_key<'a, B, F>(&'a self, b: &B, f: F) -> Result<usize, usize> where
B: Ord,
F: FnMut(&'a T) -> B,
1.10.0[src]
B: Ord,
F: FnMut(&'a T) -> B,
Binary searches this sorted slice with a key extraction function.
Assumes that the slice is sorted by the key, for instance with
sort_by_key
using the same key extraction function.
If a matching value is found then returns Ok
, containing the
index for the matched element; if no match is found then Err
is returned, containing the index where a matching element could
be inserted while maintaining sorted order.
Examples
Looks up a series of four elements in a slice of pairs sorted by
their second elements. The first is found, with a uniquely
determined position; the second and third are not found; the
fourth could match any position in [1, 4]
.
let s = [(0, 0), (2, 1), (4, 1), (5, 1), (3, 1), (1, 2), (2, 3), (4, 5), (5, 8), (3, 13), (1, 21), (2, 34), (4, 55)]; assert_eq!(s.binary_search_by_key(&13, |&(a,b)| b), Ok(9)); assert_eq!(s.binary_search_by_key(&4, |&(a,b)| b), Err(7)); assert_eq!(s.binary_search_by_key(&100, |&(a,b)| b), Err(13)); let r = s.binary_search_by_key(&1, |&(a,b)| b); assert!(match r { Ok(1...4) => true, _ => false, });
fn sort(&mut self) where
T: Ord,
1.0.0[src]
T: Ord,
Sorts the slice.
This sort is stable (i.e. does not reorder equal elements) and O(n log n)
worst-case.
When applicable, unstable sorting is preferred because it is generally faster than stable
sorting and it doesn't allocate auxiliary memory.
See sort_unstable
.
Current implementation
The current algorithm is an adaptive, iterative merge sort inspired by timsort. It is designed to be very fast in cases where the slice is nearly sorted, or consists of two or more sorted sequences concatenated one after another.
Also, it allocates temporary storage half the size of self
, but for short slices a
non-allocating insertion sort is used instead.
Examples
let mut v = [-5, 4, 1, -3, 2]; v.sort(); assert!(v == [-5, -3, 1, 2, 4]);
fn sort_by<F>(&mut self, compare: F) where
F: FnMut(&T, &T) -> Ordering,
1.0.0[src]
F: FnMut(&T, &T) -> Ordering,
Sorts the slice with a comparator function.
This sort is stable (i.e. does not reorder equal elements) and O(n log n)
worst-case.
When applicable, unstable sorting is preferred because it is generally faster than stable
sorting and it doesn't allocate auxiliary memory.
See sort_unstable_by
.
Current implementation
The current algorithm is an adaptive, iterative merge sort inspired by timsort. It is designed to be very fast in cases where the slice is nearly sorted, or consists of two or more sorted sequences concatenated one after another.
Also, it allocates temporary storage half the size of self
, but for short slices a
non-allocating insertion sort is used instead.
Examples
let mut v = [5, 4, 1, 3, 2]; v.sort_by(|a, b| a.cmp(b)); assert!(v == [1, 2, 3, 4, 5]); // reverse sorting v.sort_by(|a, b| b.cmp(a)); assert!(v == [5, 4, 3, 2, 1]);
fn sort_by_key<B, F>(&mut self, f: F) where
B: Ord,
F: FnMut(&T) -> B,
1.7.0[src]
B: Ord,
F: FnMut(&T) -> B,
Sorts the slice with a key extraction function.
This sort is stable (i.e. does not reorder equal elements) and O(n log n)
worst-case.
When applicable, unstable sorting is preferred because it is generally faster than stable
sorting and it doesn't allocate auxiliary memory.
See sort_unstable_by_key
.
Current implementation
The current algorithm is an adaptive, iterative merge sort inspired by timsort. It is designed to be very fast in cases where the slice is nearly sorted, or consists of two or more sorted sequences concatenated one after another.
Also, it allocates temporary storage half the size of self
, but for short slices a
non-allocating insertion sort is used instead.
Examples
let mut v = [-5i32, 4, 1, -3, 2]; v.sort_by_key(|k| k.abs()); assert!(v == [1, 2, -3, 4, -5]);
fn sort_unstable(&mut self) where
T: Ord,
1.20.0[src]
T: Ord,
Sorts the slice, but may not preserve the order of equal elements.
This sort is unstable (i.e. may reorder equal elements), in-place (i.e. does not allocate),
and O(n log n)
worst-case.
Current implementation
The current algorithm is based on pattern-defeating quicksort by Orson Peters, which combines the fast average case of randomized quicksort with the fast worst case of heapsort, while achieving linear time on slices with certain patterns. It uses some randomization to avoid degenerate cases, but with a fixed seed to always provide deterministic behavior.
It is typically faster than stable sorting, except in a few special cases, e.g. when the slice consists of several concatenated sorted sequences.
Examples
let mut v = [-5, 4, 1, -3, 2]; v.sort_unstable(); assert!(v == [-5, -3, 1, 2, 4]);
fn sort_unstable_by<F>(&mut self, compare: F) where
F: FnMut(&T, &T) -> Ordering,
1.20.0[src]
F: FnMut(&T, &T) -> Ordering,
Sorts the slice with a comparator function, but may not preserve the order of equal elements.
This sort is unstable (i.e. may reorder equal elements), in-place (i.e. does not allocate),
and O(n log n)
worst-case.
Current implementation
The current algorithm is based on pattern-defeating quicksort by Orson Peters, which combines the fast average case of randomized quicksort with the fast worst case of heapsort, while achieving linear time on slices with certain patterns. It uses some randomization to avoid degenerate cases, but with a fixed seed to always provide deterministic behavior.
It is typically faster than stable sorting, except in a few special cases, e.g. when the slice consists of several concatenated sorted sequences.
Examples
let mut v = [5, 4, 1, 3, 2]; v.sort_unstable_by(|a, b| a.cmp(b)); assert!(v == [1, 2, 3, 4, 5]); // reverse sorting v.sort_unstable_by(|a, b| b.cmp(a)); assert!(v == [5, 4, 3, 2, 1]);
fn sort_unstable_by_key<B, F>(&mut self, f: F) where
B: Ord,
F: FnMut(&T) -> B,
1.20.0[src]
B: Ord,
F: FnMut(&T) -> B,
Sorts the slice with a key extraction function, but may not preserve the order of equal elements.
This sort is unstable (i.e. may reorder equal elements), in-place (i.e. does not allocate),
and O(n log n)
worst-case.
Current implementation
The current algorithm is based on pattern-defeating quicksort by Orson Peters, which combines the fast average case of randomized quicksort with the fast worst case of heapsort, while achieving linear time on slices with certain patterns. It uses some randomization to avoid degenerate cases, but with a fixed seed to always provide deterministic behavior.
It is typically faster than stable sorting, except in a few special cases, e.g. when the slice consists of several concatenated sorted sequences.
Examples
let mut v = [-5i32, 4, 1, -3, 2]; v.sort_unstable_by_key(|k| k.abs()); assert!(v == [1, 2, -3, 4, -5]);
fn rotate(&mut self, mid: usize)
[src]
slice_rotate
)Permutes the slice in-place such that self[mid..]
moves to the
beginning of the slice while self[..mid]
moves to the end of the
slice. Equivalently, rotates the slice mid
places to the left
or k = self.len() - mid
places to the right.
This is a "k-rotation", a permutation in which item i
moves to
position i + k
, modulo the length of the slice. See Elements
of Programming §10.4.
Rotation by mid
and rotation by k
are inverse operations.
Panics
This function will panic if mid
is greater than the length of the
slice. (Note that mid == self.len()
does not panic; it's a nop
rotation with k == 0
, the inverse of a rotation with mid == 0
.)
Complexity
Takes linear (in self.len()
) time.
Examples
#![feature(slice_rotate)] let mut a = [1, 2, 3, 4, 5, 6, 7]; let mid = 2; a.rotate(mid); assert_eq!(&a, &[3, 4, 5, 6, 7, 1, 2]); let k = a.len() - mid; a.rotate(k); assert_eq!(&a, &[1, 2, 3, 4, 5, 6, 7]); use std::ops::Range; fn slide<T>(slice: &mut [T], range: Range<usize>, to: usize) { if to < range.start { slice[to..range.end].rotate(range.start-to); } else if to > range.end { slice[range.start..to].rotate(range.end-range.start); } } let mut v: Vec<_> = (0..10).collect(); slide(&mut v, 1..4, 7); assert_eq!(&v, &[0, 4, 5, 6, 1, 2, 3, 7, 8, 9]); slide(&mut v, 6..8, 1); assert_eq!(&v, &[0, 3, 7, 4, 5, 6, 1, 2, 8, 9]);
fn clone_from_slice(&mut self, src: &[T]) where
T: Clone,
1.7.0[src]
T: Clone,
Copies the elements from src
into self
.
The length of src
must be the same as self
.
If src
implements Copy
, it can be more performant to use
copy_from_slice
.
Panics
This function will panic if the two slices have different lengths.
Examples
let mut dst = [0, 0, 0]; let src = [1, 2, 3]; dst.clone_from_slice(&src); assert!(dst == [1, 2, 3]);
fn copy_from_slice(&mut self, src: &[T]) where
T: Copy,
1.9.0[src]
T: Copy,
Copies all elements from src
into self
, using a memcpy.
The length of src
must be the same as self
.
If src
does not implement Copy
, use clone_from_slice
.
Panics
This function will panic if the two slices have different lengths.
Examples
let mut dst = [0, 0, 0]; let src = [1, 2, 3]; dst.copy_from_slice(&src); assert_eq!(src, dst);
fn swap_with_slice(&mut self, src: &mut [T])
[src]
swap_with_slice
)Swaps all elements in self
with those in src
.
The length of src
must be the same as self
.
Panics
This function will panic if the two slices have different lengths.
Example
#![feature(swap_with_slice)] let mut src = [1, 2, 3]; let mut dst = [7, 8, 9]; src.swap_with_slice(&mut dst); assert_eq!(src, [7, 8, 9]); assert_eq!(dst, [1, 2, 3]);
fn to_vec(&self) -> Vec<T> where
T: Clone,
1.0.0[src]
T: Clone,
Copies self
into a new Vec
.
Examples
let s = [10, 40, 30]; let x = s.to_vec(); // Here, `s` and `x` can be modified independently.
Trait Implementations
impl FromBuf for BytesMut
[src]
impl BufMut for BytesMut
[src]
fn remaining_mut(&self) -> usize
[src]
Returns the number of bytes that can be written from the current position until the end of the buffer is reached. Read more
unsafe fn advance_mut(&mut self, cnt: usize)
[src]
Advance the internal cursor of the BufMut Read more
unsafe fn bytes_mut(&mut self) -> &mut [u8]
[src]
Returns a mutable slice starting at the current BufMut position and of length between 0 and BufMut::remaining_mut()
. Read more
fn put_slice(&mut self, src: &[u8])
[src]
Transfer bytes into self
from src
and advance the cursor by the number of bytes written. Read more
fn put_u8(&mut self, n: u8)
[src]
Writes an unsigned 8 bit integer to self
. Read more
fn put_i8(&mut self, n: i8)
[src]
Writes a signed 8 bit integer to self
. Read more
fn has_remaining_mut(&self) -> bool
[src]
Returns true if there is space in self
for more bytes. Read more
unsafe fn bytes_vec_mut<'a>(&'a mut self, dst: &mut [&'a mut IoVec]) -> usize
[src]
Fills dst
with potentially multiple mutable slices starting at self
's current position. Read more
fn put<T: IntoBuf>(&mut self, src: T) where
Self: Sized,
[src]
Self: Sized,
Transfer bytes into self
from src
and advance the cursor by the number of bytes written. Read more
fn put_u16<T: ByteOrder>(&mut self, n: u16)
[src]
Writes an unsigned 16 bit integer to self
in the specified byte order. Read more
fn put_i16<T: ByteOrder>(&mut self, n: i16)
[src]
Writes a signed 16 bit integer to self
in the specified byte order. Read more
fn put_u32<T: ByteOrder>(&mut self, n: u32)
[src]
Writes an unsigned 32 bit integer to self
in the specified byte order. Read more
fn put_i32<T: ByteOrder>(&mut self, n: i32)
[src]
Writes a signed 32 bit integer to self
in the specified byte order. Read more
fn put_u64<T: ByteOrder>(&mut self, n: u64)
[src]
Writes an unsigned 64 bit integer to self
in the specified byte order. Read more
fn put_i64<T: ByteOrder>(&mut self, n: i64)
[src]
Writes a signed 64 bit integer to self
in the specified byte order. Read more
fn put_uint<T: ByteOrder>(&mut self, n: u64, nbytes: usize)
[src]
Writes an unsigned n-byte integer to self
in the specified byte order. Read more
fn put_int<T: ByteOrder>(&mut self, n: i64, nbytes: usize)
[src]
Writes a signed n-byte integer to self
in the specified byte order. Read more
fn put_f32<T: ByteOrder>(&mut self, n: f32)
[src]
Writes an IEEE754 single-precision (4 bytes) floating point number to self
in the specified byte order. Read more
fn put_f64<T: ByteOrder>(&mut self, n: f64)
[src]
Writes an IEEE754 double-precision (8 bytes) floating point number to self
in the specified byte order. Read more
fn by_ref(&mut self) -> &mut Self where
Self: Sized,
[src]
Self: Sized,
Creates a "by reference" adaptor for this instance of BufMut
. Read more
fn writer(self) -> Writer<Self> where
Self: Sized,
[src]
Self: Sized,
Creates an adaptor which implements the Write
trait for self
. Read more
impl IntoBuf for BytesMut
[src]
type Buf = Cursor<Self>
The Buf
type that self
is being converted into
fn into_buf(self) -> Self::Buf
[src]
Creates a Buf
from a value. Read more
impl<'a> IntoBuf for &'a BytesMut
[src]
type Buf = Cursor<&'a BytesMut>
The Buf
type that self
is being converted into
fn into_buf(self) -> Self::Buf
[src]
Creates a Buf
from a value. Read more
impl AsRef<[u8]> for BytesMut
[src]
impl Deref for BytesMut
[src]
type Target = [u8]
The resulting type after dereferencing.
fn deref(&self) -> &[u8]
[src]
Dereferences the value.
impl AsMut<[u8]> for BytesMut
[src]
impl DerefMut for BytesMut
[src]
impl From<Vec<u8>> for BytesMut
[src]
impl From<String> for BytesMut
[src]
impl<'a> From<&'a [u8]> for BytesMut
[src]
impl<'a> From<&'a str> for BytesMut
[src]
impl From<Bytes> for BytesMut
[src]
impl PartialEq for BytesMut
[src]
fn eq(&self, other: &BytesMut) -> bool
[src]
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests for !=
.
impl PartialOrd for BytesMut
[src]
fn partial_cmp(&self, other: &BytesMut) -> Option<Ordering>
[src]
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl Ord for BytesMut
[src]
fn cmp(&self, other: &BytesMut) -> Ordering
[src]
This method returns an Ordering
between self
and other
. Read more
fn max(self, other: Self) -> Self
1.21.0[src]
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
Compares and returns the minimum of two values. Read more
impl Eq for BytesMut
[src]
impl Default for BytesMut
[src]
impl Debug for BytesMut
[src]
impl Hash for BytesMut
[src]
fn hash<H>(&self, state: &mut H) where
H: Hasher,
[src]
H: Hasher,
Feeds this value into the given [Hasher
]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl Borrow<[u8]> for BytesMut
[src]
impl Write for BytesMut
[src]
fn write_str(&mut self, s: &str) -> Result
[src]
Writes a slice of bytes into this writer, returning whether the write succeeded. Read more
fn write_fmt(&mut self, args: Arguments) -> Result
[src]
Glue for usage of the [write!
] macro with implementors of this trait. Read more
fn write_char(&mut self, c: char) -> Result<(), Error>
1.1.0[src]
Writes a [char
] into this writer, returning whether the write succeeded. Read more
impl Clone for BytesMut
[src]
fn clone(&self) -> BytesMut
[src]
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl IntoIterator for BytesMut
[src]
type Item = u8
The type of the elements being iterated over.
type IntoIter = Iter<Cursor<BytesMut>>
Which kind of iterator are we turning this into?
fn into_iter(self) -> Self::IntoIter
[src]
Creates an iterator from a value. Read more
impl<'a> IntoIterator for &'a BytesMut
[src]
type Item = u8
The type of the elements being iterated over.
type IntoIter = Iter<Cursor<&'a BytesMut>>
Which kind of iterator are we turning this into?
fn into_iter(self) -> Self::IntoIter
[src]
Creates an iterator from a value. Read more
impl Extend<u8> for BytesMut
[src]
fn extend<T>(&mut self, iter: T) where
T: IntoIterator<Item = u8>,
[src]
T: IntoIterator<Item = u8>,
Extends a collection with the contents of an iterator. Read more
impl<'a> Extend<&'a u8> for BytesMut
[src]
fn extend<T>(&mut self, iter: T) where
T: IntoIterator<Item = &'a u8>,
[src]
T: IntoIterator<Item = &'a u8>,
Extends a collection with the contents of an iterator. Read more
impl PartialEq<[u8]> for BytesMut
[src]
fn eq(&self, other: &[u8]) -> bool
[src]
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests for !=
.
impl PartialOrd<[u8]> for BytesMut
[src]
fn partial_cmp(&self, other: &[u8]) -> Option<Ordering>
[src]
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl PartialEq<str> for BytesMut
[src]
fn eq(&self, other: &str) -> bool
[src]
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests for !=
.
impl PartialOrd<str> for BytesMut
[src]
fn partial_cmp(&self, other: &str) -> Option<Ordering>
[src]
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl PartialEq<Vec<u8>> for BytesMut
[src]
fn eq(&self, other: &Vec<u8>) -> bool
[src]
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests for !=
.
impl PartialOrd<Vec<u8>> for BytesMut
[src]
fn partial_cmp(&self, other: &Vec<u8>) -> Option<Ordering>
[src]
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl PartialEq<String> for BytesMut
[src]
fn eq(&self, other: &String) -> bool
[src]
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests for !=
.
impl PartialOrd<String> for BytesMut
[src]
fn partial_cmp(&self, other: &String) -> Option<Ordering>
[src]
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl<'a, T: ?Sized> PartialEq<&'a T> for BytesMut where
BytesMut: PartialEq<T>,
[src]
BytesMut: PartialEq<T>,
fn eq(&self, other: &&'a T) -> bool
[src]
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests for !=
.
impl<'a, T: ?Sized> PartialOrd<&'a T> for BytesMut where
BytesMut: PartialOrd<T>,
[src]
BytesMut: PartialOrd<T>,
fn partial_cmp(&self, other: &&'a T) -> Option<Ordering>
[src]
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more