Struct bytes::Bytes

pub struct Bytes { /* fields omitted */ }

A reference counted contiguous slice of memory.

Bytes is an efficient container for storing and operating on contiguous slices of memory. It is intended for use primarily in networking code, but could have applications elsewhere as well.

Bytes values facilitate zero-copy network programming by allowing multiple Bytes objects to point to the same underlying memory. This is managed by using a reference count to track when the memory is no longer needed and can be freed.

use bytes::Bytes;

let mut mem = Bytes::from(&b"Hello world"[..]);
let a = mem.slice(0, 5);

assert_eq!(&a[..], b"Hello");

let b = mem.split_to(6);

assert_eq!(&mem[..], b"world");
assert_eq!(&b[..], b"Hello ");

Memory layout

The Bytes struct itself is fairly small, limited to a pointer to the memory and 4 usize fields used to track information about which segment of the underlying memory the Bytes handle has access to.

The memory layout looks like this:

+-------+
| Bytes |
+-------+
 /      \_____
|              \
v               v
+-----+------------------------------------+
| Arc |         |      Data     |          |
+-----+------------------------------------+

Bytes keeps both a pointer to the shared Arc containing the full memory slice and a pointer to the start of the region visible by the handle. Bytes also tracks the length of its view into the memory.

Sharing

The memory itself is reference counted, and multiple Bytes objects may point to the same region. Each Bytes handle point to different sections within the memory region, and Bytes handle may or may not have overlapping views into the memory.

   Arc ptrs                   +---------+
   ________________________ / | Bytes 2 |
  /                           +---------+
 /          +-----------+     |         |
|_________/ |  Bytes 1  |     |         |
|           +-----------+     |         |
|           |           | ___/ data     | tail
|      data |      tail |/              |
v           v           v               v
+-----+---------------------------------+-----+
| Arc |     |           |               |     |
+-----+---------------------------------+-----+

Mutating

While Bytes handles may potentially represent overlapping views of the underlying memory slice and may not be mutated, BytesMut handles are guaranteed to be the only handle able to view that slice of memory. As such, BytesMut handles are able to mutate the underlying memory. Note that holding a unique view to a region of memory does not mean that there are no other Bytes and BytesMut handles with disjoint views of the underlying memory.

Inline bytes

As an optimization, when the slice referenced by a Bytes or BytesMut handle is small enough [1], Bytes will avoid the allocation by inlining the slice directly in the handle. In this case, a clone is no longer "shallow" and the data will be copied.

[1] Small enough: 31 bytes on 64 bit systems, 15 on 32 bit systems.

Methods

impl Bytes

fn with_capacity(capacity: usize) -> Bytes

Creates a new Bytes with the specified capacity.

The returned Bytes will be able to hold at least capacity bytes without reallocating. If capacity is under 3 * size_of::<usize>(), then BytesMut will not allocate.

It is important to note that this function does not specify the length of the returned Bytes, but only the capacity.

Examples

use bytes::Bytes;

let mut bytes = Bytes::with_capacity(64);

// `bytes` contains no data, even though there is capacity
assert_eq!(bytes.len(), 0);

bytes.extend_from_slice(&b"hello world"[..]);

assert_eq!(&bytes[..], b"hello world");

fn new() -> Bytes

Creates a new empty Bytes.

This will not allocate and the returned Bytes handle will be empty.

Examples

use bytes::Bytes;

let b = Bytes::new();
assert_eq!(&b[..], b"");

fn from_static(bytes: &'static [u8]) -> Bytes

Creates a new Bytes from a static slice.

The returned Bytes will point directly to the static slice. There is no allocating or copying.

Examples

use bytes::Bytes;

let b = Bytes::from_static(b"hello");
assert_eq!(&b[..], b"hello");

fn len(&self) -> usize

Returns the number of bytes contained in this Bytes.

Examples

use bytes::Bytes;

let b = Bytes::from(&b"hello"[..]);
assert_eq!(b.len(), 5);

fn is_empty(&self) -> bool

Returns true if the Bytes has a length of 0.

Examples

use bytes::Bytes;

let b = Bytes::new();
assert!(b.is_empty());

fn slice(&self, begin: usize, end: usize) -> Bytes

Returns a slice of self for the index range [begin..end).

This will increment the reference count for the underlying memory and return a new Bytes handle set to the slice.

This operation is O(1).

Examples

use bytes::Bytes;

let a = Bytes::from(&b"hello world"[..]);
let b = a.slice(2, 5);

assert_eq!(&b[..], b"llo");

Panics

Requires that begin <= end and end <= self.len(), otherwise slicing will panic.

fn slice_from(&self, begin: usize) -> Bytes

Returns a slice of self for the index range [begin..self.len()).

This will increment the reference count for the underlying memory and return a new Bytes handle set to the slice.

This operation is O(1) and is equivalent to self.slice(begin, self.len()).

Examples

use bytes::Bytes;

let a = Bytes::from(&b"hello world"[..]);
let b = a.slice_from(6);

assert_eq!(&b[..], b"world");

Panics

Requires that begin <= self.len(), otherwise slicing will panic.

fn slice_to(&self, end: usize) -> Bytes

Returns a slice of self for the index range [0..end).

This will increment the reference count for the underlying memory and return a new Bytes handle set to the slice.

This operation is O(1) and is equivalent to self.slice(0, end).

Examples

use bytes::Bytes;

let a = Bytes::from(&b"hello world"[..]);
let b = a.slice_to(5);

assert_eq!(&b[..], b"hello");

Panics

Requires that end <= self.len(), otherwise slicing will panic.

fn split_off(&mut self, at: usize) -> Bytes

Splits the bytes into two at the given index.

Afterwards self contains elements [0, at), and the returned Bytes contains elements [at, len).

This is an O(1) operation that just increases the reference count and sets a few indices.

Examples

use bytes::Bytes;

let mut a = Bytes::from(&b"hello world"[..]);
let b = a.split_off(5);

assert_eq!(&a[..], b"hello");
assert_eq!(&b[..], b" world");

Panics

Panics if at > len.

fn split_to(&mut self, at: usize) -> Bytes

Splits the bytes into two at the given index.

Afterwards self contains elements [at, len), and the returned Bytes contains elements [0, at).

This is an O(1) operation that just increases the reference count and sets a few indices.

Examples

use bytes::Bytes;

let mut a = Bytes::from(&b"hello world"[..]);
let b = a.split_to(5);

assert_eq!(&a[..], b" world");
assert_eq!(&b[..], b"hello");

Panics

Panics if at > len.

fn truncate(&mut self, len: usize)

Shortens the buffer, keeping the first len bytes and dropping the rest.

If len is greater than the buffer's current length, this has no effect.

The split_off method can emulate truncate, but this causes the excess bytes to be returned instead of dropped.

Examples

use bytes::Bytes;

let mut buf = Bytes::from(&b"hello world"[..]);
buf.truncate(5);
assert_eq!(buf, b"hello"[..]);

fn clear(&mut self)

Clears the buffer, removing all data.

Examples

use bytes::Bytes;

let mut buf = Bytes::from(&b"hello world"[..]);
buf.clear();
assert!(buf.is_empty());

fn try_mut(self) -> Result<BytesMut, Bytes>

Attempts to convert into a BytesMut handle.

This will only succeed if there are no other outstanding references to the underlying chunk of memory. Bytes handles that contain inlined bytes will always be convertable to BytesMut.

Examples

use bytes::Bytes;

let a = Bytes::from(&b"Mary had a little lamb, little lamb, little lamb..."[..]);

// Create a shallow clone
let b = a.clone();

// This will fail because `b` shares a reference with `a`
let a = a.try_mut().unwrap_err();

drop(b);

// This will succeed
let mut a = a.try_mut().unwrap();

a[0] = b'b';

assert_eq!(&a[..4], b"bary");

fn extend_from_slice(&mut self, extend: &[u8])

Appends given bytes to this object.

If this Bytes object has not enough capacity, it is resized first. If it is shared (refcount > 1), it is copied first.

This operation can be less effective than the similar operation on BytesMut, especially on small additions.

Examples

use bytes::Bytes;

let mut buf = Bytes::from("aabb");
buf.extend_from_slice(b"ccdd");
buf.extend_from_slice(b"eeff");

assert_eq!(b"aabbccddeeff", &buf[..]);

Methods from Deref<Target = [u8]>

fn len(&self) -> usize

Returns the number of elements in the slice.

Examples

let a = [1, 2, 3];
assert_eq!(a.len(), 3);

fn is_empty(&self) -> bool

Returns true if the slice has a length of 0.

Examples

let a = [1, 2, 3];
assert!(!a.is_empty());

fn first(&self) -> Option<&T>

Returns the first element of the slice, or None if it is empty.

Examples

let v = [10, 40, 30];
assert_eq!(Some(&10), v.first());

let w: &[i32] = &[];
assert_eq!(None, w.first());

fn split_first(&self) -> Option<(&T, &[T])>

Returns the first and all the rest of the elements of the slice, or None if it is empty.

Examples

let x = &[0, 1, 2];

if let Some((first, elements)) = x.split_first() {
    assert_eq!(first, &0);
    assert_eq!(elements, &[1, 2]);
}

fn split_last(&self) -> Option<(&T, &[T])>

Returns the last and all the rest of the elements of the slice, or None if it is empty.

Examples

let x = &[0, 1, 2];

if let Some((last, elements)) = x.split_last() {
    assert_eq!(last, &2);
    assert_eq!(elements, &[0, 1]);
}

fn last(&self) -> Option<&T>

Returns the last element of the slice, or None if it is empty.

Examples

let v = [10, 40, 30];
assert_eq!(Some(&30), v.last());

let w: &[i32] = &[];
assert_eq!(None, w.last());

fn get<I>(&self, index: I) -> Option<&<I as SliceIndex<[T]>>::Output> where
    I: SliceIndex<[T]>, 

Returns a reference to an element or subslice depending on the type of index.

• If given a position, returns a reference to the element at that position or None if out of bounds.
• If given a range, returns the subslice corresponding to that range, or None if out of bounds.

Examples

let v = [10, 40, 30];
assert_eq!(Some(&40), v.get(1));
assert_eq!(Some(&[10, 40][..]), v.get(0..2));
assert_eq!(None, v.get(3));
assert_eq!(None, v.get(0..4));

unsafe fn get_unchecked<I>(&self, index: I) -> &<I as SliceIndex<[T]>>::Output where
    I: SliceIndex<[T]>, 

Returns a reference to an element or subslice, without doing bounds checking.

This is generally not recommended, use with caution! For a safe alternative see get.

Examples

let x = &[1, 2, 4];

unsafe {
    assert_eq!(x.get_unchecked(1), &2);
}

fn as_ptr(&self) -> *const T

Returns a raw pointer to the slice's buffer.

The caller must ensure that the slice outlives the pointer this function returns, or else it will end up pointing to garbage.

Modifying the container referenced by this slice may cause its buffer to be reallocated, which would also make any pointers to it invalid.

Examples

let x = &[1, 2, 4];
let x_ptr = x.as_ptr();

unsafe {
    for i in 0..x.len() {
        assert_eq!(x.get_unchecked(i), &*x_ptr.offset(i as isize));
    }
}

fn iter(&self) -> Iter<T>

Returns an iterator over the slice.

Examples

let x = &[1, 2, 4];
let mut iterator = x.iter();

assert_eq!(iterator.next(), Some(&1));
assert_eq!(iterator.next(), Some(&2));
assert_eq!(iterator.next(), Some(&4));
assert_eq!(iterator.next(), None);

fn windows(&self, size: usize) -> Windows<T>

Returns an iterator over all contiguous windows of length size. The windows overlap. If the slice is shorter than size, the iterator returns no values.

Panics

Panics if size is 0.

Examples

let slice = ['r', 'u', 's', 't'];
let mut iter = slice.windows(2);
assert_eq!(iter.next().unwrap(), &['r', 'u']);
assert_eq!(iter.next().unwrap(), &['u', 's']);
assert_eq!(iter.next().unwrap(), &['s', 't']);
assert!(iter.next().is_none());

If the slice is shorter than size:

let slice = ['f', 'o', 'o'];
let mut iter = slice.windows(4);
assert!(iter.next().is_none());

fn chunks(&self, size: usize) -> Chunks<T>

Returns an iterator over size elements of the slice at a time. The chunks are slices and do not overlap. If size does not divide the length of the slice, then the last chunk will not have length size.

Panics

Panics if size is 0.

Examples

let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.chunks(2);
assert_eq!(iter.next().unwrap(), &['l', 'o']);
assert_eq!(iter.next().unwrap(), &['r', 'e']);
assert_eq!(iter.next().unwrap(), &['m']);
assert!(iter.next().is_none());

fn split_at(&self, mid: usize) -> (&[T], &[T])

Divides one slice into two at an index.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Panics

Panics if mid > len.

Examples

let v = [10, 40, 30, 20, 50];
let (v1, v2) = v.split_at(2);
assert_eq!([10, 40], v1);
assert_eq!([30, 20, 50], v2);

fn split<F>(&self, pred: F) -> Split<T, F> where
    F: FnMut(&T) -> bool, 

Returns an iterator over subslices separated by elements that match pred. The matched element is not contained in the subslices.

Examples

let slice = [10, 40, 33, 20];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10, 40]);
assert_eq!(iter.next().unwrap(), &[20]);
assert!(iter.next().is_none());

If the first element is matched, an empty slice will be the first item returned by the iterator. Similarly, if the last element in the slice is matched, an empty slice will be the last item returned by the iterator:

let slice = [10, 40, 33];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10, 40]);
assert_eq!(iter.next().unwrap(), &[]);
assert!(iter.next().is_none());

If two matched elements are directly adjacent, an empty slice will be present between them:

let slice = [10, 6, 33, 20];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10]);
assert_eq!(iter.next().unwrap(), &[]);
assert_eq!(iter.next().unwrap(), &[20]);
assert!(iter.next().is_none());

fn rsplit<F>(&self, pred: F) -> RSplit<T, F> where
    F: FnMut(&T) -> bool, 

🔬 This is a nightly-only experimental API. (slice_rsplit)

Returns an iterator over subslices separated by elements that match pred, starting at the end of the slice and working backwards. The matched element is not contained in the subslices.

Examples

#![feature(slice_rsplit)]

let slice = [11, 22, 33, 0, 44, 55];
let mut iter = slice.rsplit(|num| *num == 0);

assert_eq!(iter.next().unwrap(), &[44, 55]);
assert_eq!(iter.next().unwrap(), &[11, 22, 33]);
assert_eq!(iter.next(), None);

As with split(), if the first or last element is matched, an empty slice will be the first (or last) item returned by the iterator.

#![feature(slice_rsplit)]

let v = &[0, 1, 1, 2, 3, 5, 8];
let mut it = v.rsplit(|n| *n % 2 == 0);
assert_eq!(it.next().unwrap(), &[]);
assert_eq!(it.next().unwrap(), &[3, 5]);
assert_eq!(it.next().unwrap(), &[1, 1]);
assert_eq!(it.next().unwrap(), &[]);
assert_eq!(it.next(), None);

fn splitn<F>(&self, n: usize, pred: F) -> SplitN<T, F> where
    F: FnMut(&T) -> bool, 

Returns an iterator over subslices separated by elements that match pred, limited to returning at most n items. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

Print the slice split once by numbers divisible by 3 (i.e. [10, 40], [20, 60, 50]):

let v = [10, 40, 30, 20, 60, 50];

for group in v.splitn(2, |num| *num % 3 == 0) {
    println!("{:?}", group);
}

fn rsplitn<F>(&self, n: usize, pred: F) -> RSplitN<T, F> where
    F: FnMut(&T) -> bool, 

Returns an iterator over subslices separated by elements that match pred limited to returning at most n items. This starts at the end of the slice and works backwards. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

Print the slice split once, starting from the end, by numbers divisible by 3 (i.e. [50], [10, 40, 30, 20]):

let v = [10, 40, 30, 20, 60, 50];

for group in v.rsplitn(2, |num| *num % 3 == 0) {
    println!("{:?}", group);
}

fn contains(&self, x: &T) -> bool where
    T: PartialEq<T>, 

Returns true if the slice contains an element with the given value.

Examples

let v = [10, 40, 30];
assert!(v.contains(&30));
assert!(!v.contains(&50));

fn starts_with(&self, needle: &[T]) -> bool where
    T: PartialEq<T>, 

Returns true if needle is a prefix of the slice.

Examples

let v = [10, 40, 30];
assert!(v.starts_with(&[10]));
assert!(v.starts_with(&[10, 40]));
assert!(!v.starts_with(&[50]));
assert!(!v.starts_with(&[10, 50]));

Always returns true if needle is an empty slice:

let v = &[10, 40, 30];
assert!(v.starts_with(&[]));
let v: &[u8] = &[];
assert!(v.starts_with(&[]));

fn ends_with(&self, needle: &[T]) -> bool where
    T: PartialEq<T>, 

Returns true if needle is a suffix of the slice.

Examples

let v = [10, 40, 30];
assert!(v.ends_with(&[30]));
assert!(v.ends_with(&[40, 30]));
assert!(!v.ends_with(&[50]));
assert!(!v.ends_with(&[50, 30]));

Always returns true if needle is an empty slice:

let v = &[10, 40, 30];
assert!(v.ends_with(&[]));
let v: &[u8] = &[];
assert!(v.ends_with(&[]));

fn binary_search(&self, x: &T) -> Result<usize, usize> where
    T: Ord, 

Binary searches this sorted slice for a given element.

If the value is found then Ok is returned, containing the index of the matching element; if the value is not found then Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

Examples

Looks up a series of four elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];

assert_eq!(s.binary_search(&13),  Ok(9));
assert_eq!(s.binary_search(&4),   Err(7));
assert_eq!(s.binary_search(&100), Err(13));
let r = s.binary_search(&1);
assert!(match r { Ok(1...4) => true, _ => false, });

fn binary_search_by<'a, F>(&'a self, f: F) -> Result<usize, usize> where
    F: FnMut(&'a T) -> Ordering, 

Binary searches this sorted slice with a comparator function.

The comparator function should implement an order consistent with the sort order of the underlying slice, returning an order code that indicates whether its argument is Less, Equal or Greater the desired target.

If a matching value is found then returns Ok, containing the index for the matched element; if no match is found then Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

Examples

Looks up a series of four elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];

let seek = 13;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Ok(9));
let seek = 4;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Err(7));
let seek = 100;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Err(13));
let seek = 1;
let r = s.binary_search_by(|probe| probe.cmp(&seek));
assert!(match r { Ok(1...4) => true, _ => false, });

fn binary_search_by_key<'a, B, F>(&'a self, b: &B, f: F) -> Result<usize, usize> where
    B: Ord,
    F: FnMut(&'a T) -> B, 

Binary searches this sorted slice with a key extraction function.

Assumes that the slice is sorted by the key, for instance with sort_by_key using the same key extraction function.

If a matching value is found then returns Ok, containing the index for the matched element; if no match is found then Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

Examples

Looks up a series of four elements in a slice of pairs sorted by their second elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [(0, 0), (2, 1), (4, 1), (5, 1), (3, 1),
         (1, 2), (2, 3), (4, 5), (5, 8), (3, 13),
         (1, 21), (2, 34), (4, 55)];

assert_eq!(s.binary_search_by_key(&13, |&(a,b)| b),  Ok(9));
assert_eq!(s.binary_search_by_key(&4, |&(a,b)| b),   Err(7));
assert_eq!(s.binary_search_by_key(&100, |&(a,b)| b), Err(13));
let r = s.binary_search_by_key(&1, |&(a,b)| b);
assert!(match r { Ok(1...4) => true, _ => false, });

fn to_vec(&self) -> Vec<T> where
    T: Clone, 

Copies self into a new Vec.

Examples

let s = [10, 40, 30];
let x = s.to_vec();
// Here, `s` and `x` can be modified independently.

Trait Implementations

impl FromBuf for Bytes

fn from_buf<T>(buf: T) -> Self where
    T: IntoBuf, 

Creates a value from a buffer.

impl IntoBuf for Bytes

type Buf = Cursor<Self>

The Buf type that self is being converted into

fn into_buf(self) -> Self::Buf

Creates a Buf from a value.

impl<'a> IntoBuf for &'a Bytes

type Buf = Cursor<Self>

The Buf type that self is being converted into

fn into_buf(self) -> Self::Buf

Creates a Buf from a value.

impl Clone for Bytes

fn clone(&self) -> Bytes

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl AsRef<[u8]> for Bytes

fn as_ref(&self) -> &[u8]

Performs the conversion.

impl Deref for Bytes

type Target = [u8]

The resulting type after dereferencing.

fn deref(&self) -> &[u8]

Dereferences the value.

impl From<BytesMut> for Bytes

fn from(src: BytesMut) -> Bytes

Performs the conversion.

impl From<Vec<u8>> for Bytes

fn from(src: Vec<u8>) -> Bytes

Performs the conversion.

impl From<String> for Bytes

fn from(src: String) -> Bytes

Performs the conversion.

impl<'a> From<&'a [u8]> for Bytes

fn from(src: &'a [u8]) -> Bytes

Performs the conversion.

impl<'a> From<&'a str> for Bytes

fn from(src: &'a str) -> Bytes

Performs the conversion.

impl PartialEq for Bytes

fn eq(&self, other: &Bytes) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialOrd for Bytes

fn partial_cmp(&self, other: &Bytes) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Ord for Bytes

fn cmp(&self, other: &Bytes) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

impl Eq for Bytes

impl Default for Bytes

fn default() -> Bytes

Returns the "default value" for a type.

impl Debug for Bytes

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Hash for Bytes

fn hash<H>(&self, state: &mut H) where
    H: Hasher, 

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl Borrow<[u8]> for Bytes

fn borrow(&self) -> &[u8]

Immutably borrows from an owned value.

impl IntoIterator for Bytes

type Item = u8

The type of the elements being iterated over.

type IntoIter = Iter<Cursor<Bytes>>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl<'a> IntoIterator for &'a Bytes

type Item = u8

The type of the elements being iterated over.

type IntoIter = Iter<Cursor<&'a Bytes>>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl Extend<u8> for Bytes

fn extend<T>(&mut self, iter: T) where
    T: IntoIterator<Item = u8>, 

Extends a collection with the contents of an iterator.

impl<'a> Extend<&'a u8> for Bytes

fn extend<T>(&mut self, iter: T) where
    T: IntoIterator<Item = &'a u8>, 

Extends a collection with the contents of an iterator.

impl PartialEq<[u8]> for Bytes

fn eq(&self, other: &[u8]) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialOrd<[u8]> for Bytes

fn partial_cmp(&self, other: &[u8]) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialEq<str> for Bytes

fn eq(&self, other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialOrd<str> for Bytes

fn partial_cmp(&self, other: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialEq<Vec<u8>> for Bytes

fn eq(&self, other: &Vec<u8>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialOrd<Vec<u8>> for Bytes

fn partial_cmp(&self, other: &Vec<u8>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialEq<String> for Bytes

fn eq(&self, other: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialOrd<String> for Bytes

fn partial_cmp(&self, other: &String) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, T: ?Sized> PartialEq<&'a T> for Bytes where
    Bytes: PartialEq<T>, 

fn eq(&self, other: &&'a T) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a, T: ?Sized> PartialOrd<&'a T> for Bytes where
    Bytes: PartialOrd<T>, 

fn partial_cmp(&self, other: &&'a T) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialEq<BytesMut> for Bytes

fn eq(&self, other: &BytesMut) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.