Struct tokio_io::codec::length_delimited::FramedWrite
[−]
[src]
pub struct FramedWrite<T, B: IntoBuf = BytesMut> { /* fields omitted */ }
Adapts a byte stream to a Sink
accepting entire frame values.
See module level documentation for more detail.
Methods
impl<T: AsyncWrite, B: IntoBuf> FramedWrite<T, B>
[src]
fn new(inner: T) -> FramedWrite<T, B>
[src]
Creates a new FramedWrite
with default configuration values.
impl<T, B: IntoBuf> FramedWrite<T, B>
[src]
fn get_ref(&self) -> &T
[src]
Returns a reference to the underlying I/O stream wrapped by
FramedWrite
.
Note that care should be taken to not tamper with the underlying stream of data coming in as it may corrupt the stream of frames otherwise being worked with.
fn get_mut(&mut self) -> &mut T
[src]
Returns a mutable reference to the underlying I/O stream wrapped by
FramedWrite
.
Note that care should be taken to not tamper with the underlying stream of data coming in as it may corrupt the stream of frames otherwise being worked with.
fn into_inner(self) -> T
[src]
Consumes the FramedWrite
, returning its underlying I/O stream.
Note that care should be taken to not tamper with the underlying stream of data coming in as it may corrupt the stream of frames otherwise being worked with.
Trait Implementations
impl<T: AsyncWrite, B: IntoBuf> Sink for FramedWrite<T, B>
[src]
type SinkItem = B
The type of value that the sink accepts.
type SinkError = Error
The type of value produced by the sink when an error occurs.
fn start_send(&mut self, item: B) -> StartSend<B, Error>
[src]
Begin the process of sending a value to the sink. Read more
fn poll_complete(&mut self) -> Poll<(), Error>
[src]
Flush all output from this sink, if necessary. Read more
fn close(&mut self) -> Poll<(), Error>
[src]
A method to indicate that no more values will ever be pushed into this sink. Read more
fn wait(self) -> Wait<Self>
[src]
Creates a new object which will produce a synchronous sink. Read more
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
<Fut as IntoFuture>::Error: From<Self::SinkError>,
[src]
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
<Fut as IntoFuture>::Error: From<Self::SinkError>,
Composes a function in front of the sink. Read more
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
[src]
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Composes a function in front of the sink. Read more
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
[src]
F: FnOnce(Self::SinkError) -> E,
Transforms the error returned by the sink.
fn sink_from_err<E>(self) -> SinkFromErr<Self, E> where
E: From<Self::SinkError>,
[src]
E: From<Self::SinkError>,
Map this sink's error to any error implementing From
for this sink's Error
, returning a new sink. Read more
fn buffer(self, amt: usize) -> Buffer<Self>
[src]
Adds a fixed-size buffer to the current sink. Read more
fn flush(self) -> Flush<Self>
[src]
A future that completes when the sink has finished processing all pending requests. Read more
fn send(self, item: Self::SinkItem) -> Send<Self>
[src]
A future that completes after the given item has been fully processed into the sink, including flushing. Read more
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<<S as Stream>::Error>,
[src]
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<<S as Stream>::Error>,
A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
impl<T: Stream, B: IntoBuf> Stream for FramedWrite<T, B>
[src]
type Item = T::Item
The type of item this stream will yield on success.
type Error = T::Error
The type of error this stream may generate.
fn poll(&mut self) -> Poll<Option<T::Item>, T::Error>
[src]
Attempt to pull out the next value of this stream, returning None
if the stream is finished. Read more
fn wait(self) -> Wait<Self>
[src]
Creates an iterator which blocks the current thread until each item of this stream is resolved. Read more
fn into_future(self) -> StreamFuture<Self>
[src]
Converts this stream into a Future
. Read more
fn map<U, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> U,
[src]
F: FnMut(Self::Item) -> U,
Converts a stream of type T
to a stream of type U
. Read more
fn map_err<U, F>(self, f: F) -> MapErr<Self, F> where
F: FnMut(Self::Error) -> U,
[src]
F: FnMut(Self::Error) -> U,
Converts a stream of error type T
to a stream of error type U
. Read more
fn filter<F>(self, f: F) -> Filter<Self, F> where
F: FnMut(&Self::Item) -> bool,
[src]
F: FnMut(&Self::Item) -> bool,
Filters the values produced by this stream according to the provided predicate. Read more
fn filter_map<F, B>(self, f: F) -> FilterMap<Self, F> where
F: FnMut(Self::Item) -> Option<B>,
[src]
F: FnMut(Self::Item) -> Option<B>,
Filters the values produced by this stream while simultaneously mapping them to a different type. Read more
fn then<F, U>(self, f: F) -> Then<Self, F, U> where
F: FnMut(Result<Self::Item, Self::Error>) -> U,
U: IntoFuture,
[src]
F: FnMut(Result<Self::Item, Self::Error>) -> U,
U: IntoFuture,
Chain on a computation for when a value is ready, passing the resulting item to the provided closure f
. Read more
fn and_then<F, U>(self, f: F) -> AndThen<Self, F, U> where
F: FnMut(Self::Item) -> U,
U: IntoFuture<Error = Self::Error>,
[src]
F: FnMut(Self::Item) -> U,
U: IntoFuture<Error = Self::Error>,
Chain on a computation for when a value is ready, passing the successful results to the provided closure f
. Read more
fn or_else<F, U>(self, f: F) -> OrElse<Self, F, U> where
F: FnMut(Self::Error) -> U,
U: IntoFuture<Item = Self::Item>,
[src]
F: FnMut(Self::Error) -> U,
U: IntoFuture<Item = Self::Item>,
Chain on a computation for when an error happens, passing the erroneous result to the provided closure f
. Read more
fn collect(self) -> Collect<Self>
[src]
Collect all of the values of this stream into a vector, returning a future representing the result of that computation. Read more
fn concat2(self) -> Concat2<Self> where
Self::Item: Extend<<Self::Item as IntoIterator>::Item>,
Self::Item: IntoIterator,
Self::Item: Default,
[src]
Self::Item: Extend<<Self::Item as IntoIterator>::Item>,
Self::Item: IntoIterator,
Self::Item: Default,
Concatenate all results of a stream into a single extendable destination, returning a future representing the end result. Read more
fn concat(self) -> Concat<Self> where
Self::Item: Extend<<Self::Item as IntoIterator>::Item>,
Self::Item: IntoIterator,
[src]
Self::Item: Extend<<Self::Item as IntoIterator>::Item>,
Self::Item: IntoIterator,
: please use Stream::concat2
instead
Concatenate all results of a stream into a single extendable destination, returning a future representing the end result. Read more
fn fold<F, T, Fut>(self, init: T, f: F) -> Fold<Self, F, Fut, T> where
F: FnMut(T, Self::Item) -> Fut,
Fut: IntoFuture<Item = T>,
Self::Error: From<<Fut as IntoFuture>::Error>,
[src]
F: FnMut(T, Self::Item) -> Fut,
Fut: IntoFuture<Item = T>,
Self::Error: From<<Fut as IntoFuture>::Error>,
Execute an accumulating computation over a stream, collecting all the values into one final result. Read more
fn flatten(self) -> Flatten<Self> where
Self::Item: Stream,
<Self::Item as Stream>::Error: From<Self::Error>,
[src]
Self::Item: Stream,
<Self::Item as Stream>::Error: From<Self::Error>,
Flattens a stream of streams into just one continuous stream. Read more
fn skip_while<P, R>(self, pred: P) -> SkipWhile<Self, P, R> where
P: FnMut(&Self::Item) -> R,
R: IntoFuture<Item = bool, Error = Self::Error>,
[src]
P: FnMut(&Self::Item) -> R,
R: IntoFuture<Item = bool, Error = Self::Error>,
Skip elements on this stream while the predicate provided resolves to true
. Read more
fn take_while<P, R>(self, pred: P) -> TakeWhile<Self, P, R> where
P: FnMut(&Self::Item) -> R,
R: IntoFuture<Item = bool, Error = Self::Error>,
[src]
P: FnMut(&Self::Item) -> R,
R: IntoFuture<Item = bool, Error = Self::Error>,
Take elements from this stream while the predicate provided resolves to true
. Read more
fn for_each<F, U>(self, f: F) -> ForEach<Self, F, U> where
F: FnMut(Self::Item) -> U,
U: IntoFuture<Item = (), Error = Self::Error>,
[src]
F: FnMut(Self::Item) -> U,
U: IntoFuture<Item = (), Error = Self::Error>,
Runs this stream to completion, executing the provided closure for each element on the stream. Read more
fn from_err<E>(self) -> FromErr<Self, E> where
E: From<Self::Error>,
[src]
E: From<Self::Error>,
Map this stream's error to any error implementing From
for this stream's Error
, returning a new stream. Read more
fn take(self, amt: u64) -> Take<Self>
[src]
Creates a new stream of at most amt
items of the underlying stream. Read more
fn skip(self, amt: u64) -> Skip<Self>
[src]
Creates a new stream which skips amt
items of the underlying stream. Read more
fn fuse(self) -> Fuse<Self>
[src]
Fuse a stream such that poll
will never again be called once it has finished. Read more
fn by_ref(&mut self) -> &mut Self
[src]
Borrows a stream, rather than consuming it. Read more
fn catch_unwind(self) -> CatchUnwind<Self> where
Self: UnwindSafe,
[src]
Self: UnwindSafe,
Catches unwinding panics while polling the stream. Read more
fn buffered(self, amt: usize) -> Buffered<Self> where
Self::Item: IntoFuture,
<Self::Item as IntoFuture>::Error == Self::Error,
[src]
Self::Item: IntoFuture,
<Self::Item as IntoFuture>::Error == Self::Error,
An adaptor for creating a buffered list of pending futures. Read more
fn buffer_unordered(self, amt: usize) -> BufferUnordered<Self> where
Self::Item: IntoFuture,
<Self::Item as IntoFuture>::Error == Self::Error,
[src]
Self::Item: IntoFuture,
<Self::Item as IntoFuture>::Error == Self::Error,
An adaptor for creating a buffered list of pending futures (unordered). Read more
fn merge<S>(self, other: S) -> Merge<Self, S> where
S: Stream<Error = Self::Error>,
[src]
S: Stream<Error = Self::Error>,
: functionality provided by select
now
An adapter for merging the output of two streams. Read more
fn zip<S>(self, other: S) -> Zip<Self, S> where
S: Stream<Error = Self::Error>,
[src]
S: Stream<Error = Self::Error>,
An adapter for zipping two streams together. Read more
fn chain<S>(self, other: S) -> Chain<Self, S> where
S: Stream<Item = Self::Item, Error = Self::Error>,
[src]
S: Stream<Item = Self::Item, Error = Self::Error>,
Adapter for chaining two stream. Read more
fn peekable(self) -> Peekable<Self>
[src]
Creates a new stream which exposes a peek
method. Read more
fn chunks(self, capacity: usize) -> Chunks<Self>
[src]
An adaptor for chunking up items of the stream inside a vector. Read more
fn select<S>(self, other: S) -> Select<Self, S> where
S: Stream<Item = Self::Item, Error = Self::Error>,
[src]
S: Stream<Item = Self::Item, Error = Self::Error>,
Creates a stream that selects the next element from either this stream or the provided one, whichever is ready first. Read more
fn forward<S>(self, sink: S) -> Forward<Self, S> where
S: Sink<SinkItem = Self::Item>,
Self::Error: From<<S as Sink>::SinkError>,
[src]
S: Sink<SinkItem = Self::Item>,
Self::Error: From<<S as Sink>::SinkError>,
A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
fn split(self) -> (SplitSink<Self>, SplitStream<Self>) where
Self: Sink,
[src]
Self: Sink,
Splits this Stream + Sink
object into separate Stream
and Sink
objects. Read more
fn inspect<F>(self, f: F) -> Inspect<Self, F> where
F: FnMut(&Self::Item) -> (),
[src]
F: FnMut(&Self::Item) -> (),
Do something with each item of this stream, afterwards passing it on. Read more
impl<T: Read, B: IntoBuf> Read for FramedWrite<T, B>
[src]
fn read(&mut self, dst: &mut [u8]) -> Result<usize>
[src]
Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
unsafe fn initializer(&self) -> Initializer
[src]
read_initializer
)Determines if this Read
er can work with buffers of uninitialized memory. Read more
fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>
1.0.0[src]
Read all bytes until EOF in this source, placing them into buf
. Read more
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0[src]
Read all bytes until EOF in this source, placing them into buf
. Read more
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
1.6.0[src]
Read the exact number of bytes required to fill buf
. Read more
fn by_ref(&mut self) -> &mut Self
1.0.0[src]
Creates a "by reference" adaptor for this instance of Read
. Read more
fn bytes(self) -> Bytes<Self>
1.0.0[src]
Transforms this Read
instance to an [Iterator
] over its bytes. Read more
fn chars(self) -> Chars<Self>
[src]
🔬 This is a nightly-only experimental API. (io
)
the semantics of a partial read/write of where errors happen is currently unclear and may change
Transforms this Read
instance to an [Iterator
] over [char
]s. Read more
fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,
1.0.0[src]
R: Read,
Creates an adaptor which will chain this stream with another. Read more
fn take(self, limit: u64) -> Take<Self>
1.0.0[src]
Creates an adaptor which will read at most limit
bytes from it. Read more
impl<T: AsyncRead, U: IntoBuf> AsyncRead for FramedWrite<T, U>
[src]
fn read_buf<B: BufMut>(&mut self, buf: &mut B) -> Poll<usize, Error>
[src]
Pull some bytes from this source into the specified Buf
, returning how many bytes were read. Read more
unsafe fn prepare_uninitialized_buffer(&self, buf: &mut [u8]) -> bool
[src]
Prepares an uninitialized buffer to be safe to pass to read
. Returns true
if the supplied buffer was zeroed out. Read more
fn framed<T: Encoder + Decoder>(self, codec: T) -> Framed<Self, T> where
Self: AsyncWrite + Sized,
[src]
Self: AsyncWrite + Sized,
Provides a Stream
and Sink
interface for reading and writing to this Io
object, using Decode
and Encode
to read and write the raw data. Read more
fn split(self) -> (ReadHalf<Self>, WriteHalf<Self>) where
Self: AsyncWrite + Sized,
[src]
Self: AsyncWrite + Sized,
Helper method for splitting this read/write object into two halves. Read more
impl<T, B: IntoBuf> Debug for FramedWrite<T, B> where
T: Debug,
B::Buf: Debug,
[src]
T: Debug,
B::Buf: Debug,